Ram Street Dual Disc Force 9.5 Clutch (11-17 GT/Boss 302)
The perfect entry level dual disc clutch for street use, good for up to 700 ft/lbs of torque.
Out of stockCompare
- For 600 Horsepower set ups
- Ideal for use 400-700 ft/lb ranges
- 9.5″x1″ 23 Spline 300 Series Clutch Discs
- Included 8-Bolt Billet Aluminum Flywheel
- 35 Pounds
- 8-Spring Hub Assemblies for increased performance.
- SFI Certified for Track Use
About Ram Street Force 9.5 Dual Disc Clutches
The Ram Force 9.5 Dual Disc system is the perfect entry level dual disc clutch system for street use. With a torque capacity up to 700 ft/lbs, this set up is ideal for small blower or turbo set-ups while maintaining a near stock-like pedal feel thanks to the use of steel backed frictions discs with sprung hub assemblies, strap driven floater plate, and moderate clamping pressure plate. Ram’s Street Force 9.5 Dual Disc Clutches come standard with their Billet Aluminum Flywheel.
A Little About the Clutch Discs
Ram’s Street Dual Disc units all feature their 300 series steel back friction discs which utilize a sprung hub top disc and a solid hub bottom disc arrangement. The sprung top disc features Ram’s Poly-coil Hub Assembly, consisting of eight urethane encapsulated damper springs to provide up to four times the shock load of conventional clutch springs. In addition to the increased shock load, this unique system reduces clutch chatter chatter on take-off to deliver a more factory like driving experience.
Three Strap Floater Plate
Ram utilizes a three strap floater plate which is designed to eliminate floater plate rattle at idle. For Mustang’s that see primarily street use, this is an ideal set-up.
Billet Aluminum Flywheel
Ram’s Street Force 9.5 Dual Disc Clutch sets come standard with their Billet Aluminum 8-Bolt Flywheel. Ram manufactures their flywheels in house to their exacting standards for design, machining, and balance. Friction surfaces are precision ground for flatness, zero runout, and surface finish for friction material compatibility.
Will it Fit?
This system is designed to fit the following vehicles:
- 2011-2017 Mustang GT (with MT-82 Manual Transmission)
- 2012-2013 Mustang Boss 302
What’s in the Box?
(1) Pressure Plate
(2) 9.5″x1″ 23 Spline 300 Series Clutch Discs
(1) Floater plate
(1) Billet Aluminum Flywheel
Only logged in customers who have purchased this product may leave a review.
You may also like…
Ram Street Dual Disc Force 10.5 Clutch (11-17 GT/Boss 302)$1,355.00
A dual disc clutch capable of handling up to 800 ft/lb torque capacities – perfect for most blower or turbo setups on your Mustang.